Level 1 Siemens

SERC are the only accredited provider in the island of Ireland of the prestigious, internationally recognised Siemens Mechatronic Systems Certification Programme (SMSCP). On successful completion of the SMSCP Level 1, the student will be recognised as a Siemens Certified Mechatronic Systems Assistant.



Academic Year: 2022/23

Course Code: 10686

Campus: Lisburn

Study Type: Part-Time

Education Level Further Education

Sessions

The following sessions are open for application on this course:

Campus & Course Type Start
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00

Course Overview

A Siemens Certified Mechatronic Systems Assistant will function as a well-grounded machine operator in a complex system, with responsibility for efficient operation of the equipment with minimal down-times.

A Siemens Certified Mechatronic Systems Assistant will be able to:

  • Localize malfunctions, identify causes and sources of malfunctions, correct malfunctions where possible, and/or document malfunctions to be passed on to the appropriate experts for resolution, or (where appropriate) to exchange or replace defective components
  • Recognize potential or impending malfunctions and contact expert assistance in order to keep the production line functioning and to prevent production loss
  • Perform routine, preventive maintenance 
  • Understand and explain the principal operations of the mechatronic subsystems in a complex system
  • Understand and explain how these subsystems work together
  • Read and understand the technical documents, reports, and outlines specific to the system and subsystems, and be able to consult with experts
  • Work effectively as a team member and to coordinate their activities with upstream and downstream operations
  • Understand and implement safety regulations required for operation of the system

Ideal If:

You already carry out work at plant assembly sites, workshops or in connections with service operations which utilise complex mechatronic systems.

You'll Learn:

All courses within the Certification Program are based upon a System Approach. Students learn about individual components and system characteristics within the context of an actual mechatronic system. There are four courses within the Level 1 which are as follows:  

  • Course 1: Electrical Components
  • Course 2: Mechanical Components and Electrical Drives
  • Course 3: (Electro) Pneumatic and Hydraulic Control Circuits
  • Course 4: Digital Fundamentals and PLCs

You'll Love:

The chance to use and learn from our state-of-the-art training equipment.

You'll Progress:

To our SMSCP Level 2 program, where you will have the opportunity to become a Siemens Certified Mechatronic Systems Associate.

You'll Need:

A background or a strong interest in engineering.

Terms & Conditions

Students will be required to comply with SERC's Terms & Conditions of study.

While we endeavour to run all our courses on the advertised day, SERC reserves the right to change the day of week on which the course runs.

Related Courses

Level 1 Siemens

SERC are the only accredited provider in the island of Ireland of the prestigious, internationally recognised Siemens Mechatronic Systems Certification Programme (SMSCP). On successful completion of the SMSCP Level 1, the student will be recognised as a Siemens Certified Mechatronic Systems Assistant.

Electrical Upskilling

This course aims to provide each student will a better understanding of common electrical practises. Once a student has completed the course, they will not only know how to work with electricity effectively, but, also, have the ability to design, wire and troubleshoot an electrical control panel.

Level 3 National Diploma Engineering - Advanced Electronics

This two-year, full-time course equivalent to 2 A levels meets entry requirements for learners wanting to progress to employment in electrical and electronic engineering,

Level 3 National Extended Diploma Engineering - Advanced Electronics

This two-year, full-time course equivalent to 3 A levels meets entry requirements for learners wanting to progress to employment in electrical and electronic engineering.

Available Sessions Summary

The following sessions are open for application on this course:

Campus & Course Type Start
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00
Part-Time
Lisburn
29/08/2022
Day: Thursday
Time: 09:00-17:00

Enquiries Information

For more information or help with this course send us an enquiry and a member of our team will get back in touch.

Further Education

Further Education

If you have just completed your GCSEs, Further Education is most likely the option for you. FE covers qualifications from entry to higher level qualifications such as Awards, Certificates, Diplomas, NVQ, BTEC and Apprenticeships.

Explore Further Education

Available Sessions

The following sessions are available to apply for:

Course Type Title Campus Start Spaces Fee
PT
FE
Level 1 Siemens
Y10686LD2E
Swipe/Scroll

Lisburn

29/08/2022
Day: Thursday
Time: 09:00-17:00

20+

PT
FE
Level 1 Siemens
Y10686LD2C
Swipe/Scroll

Lisburn

29/08/2022
Day: Thursday
Time: 09:00-17:00

20+

PT
FE
Level 1 Siemens
Y10686LD1A
Swipe/Scroll

Lisburn

29/08/2022
Day: Thursday
Time: 09:00-17:00

20+

£2800.00

PT
FE
Level 1 Siemens
Y10686LD1B
Swipe/Scroll

Lisburn

29/08/2022
Day: Thursday
Time: 09:00-17:00

20+

Please select a campus from the list above to view the available sessions.

Customer Enquiries

Need more information or have a question about this course? Send us a message below and we will get in touch.

Start New Enquiry